Case-Based Collaborative Learning in Undergraduate Radiology Teaching-Are Essential Conditions for Group Discussions Met?

BACKGROUND: Delivering case-based collaborative learning (cCBL) at scale using technology that both presents the clinical problem authentically and seeks to foster quality group discussion is a challenge, especially argumentation which is critical for effective learning. The aim of this study was to investigate the presence of essential conditions to capitalize on a technology-enhanced cCBL scenario for teaching radiology and facilitating quality group discussion. METHODS: A questionnaire was administered to 114 fourth-year medical students who completed a technology-enhanced cCBL scenario for teaching neuroradiology. It consisted of individual online pre-class work and face-to-face in-class work, where group discussion followed individual work at a workstation. Items from the "Heedful Interrelating in Collaborative Educational Settings" scale and "positive emotional engagement" questionnaire assessed the quality of social-cognitive processes and emotional engagement during the group discussions. Structured interviews were used to explore the teachers' awareness of and engagement with the technology. RESULTS: The mean scores of most "heedfulness" items were below 3.5 (7-point scale), suggesting that participants did not enter the debriefing with a mindset conducive for argumentation. However, for the affective states "interest" and "enjoyment" the mean scores were above 5. Free text comments suggested participants enjoyed the superficial interactions, but did not necessarily engage in argumentation. Structured interviews revealed teachers were aware of the possibilities of the learning dashboard and used it as a common frame of reference, but did not really succeed to use it as a springboard for discussion. CONCLUSION: A technology-enhanced cCBL scenario is useful for teaching radiology in undergraduate medical education, but the added value of acquiring in-depth knowledge will only be achieved when students are aware of the importance of an "heedful" mind-set.

In Vitro Evaluation of Balloon-Expandable Chimney Grafts in the Renal Arteries Combined With the Endurant Endograft.

Purpose: To compare balloon-expandable covered stents (BECS) available for use as renal chimney grafts to the Advanta V12 approved for use with the Endurant endograft. Materials and Methods: A silicone model was manufactured based on preoperative computed tomography angiography (CTA) scans of a patient with a 7-cm juxtarenal aneurysm treated with an Endurant bifurcated endograft and an Advanta V12 covered stent for the 6-mm-diameter right renal artery. The model was placed in a flow box filled with a 37°C blood-mimicking solution equipped with a pulsatile pumping system (140/60 mm Hg). The tested BECS were the Advanta V12, the VBX, and the BeGraft+. A 36-mm-diameter Endurant II endograft with a 16-mm-diameter contralateral limb and a 6×59-mm BECS chimney graft were used in 9 consecutive tests (3 for each combination). After each implantation, the model was placed in the CT scanner, and 2 radiologists blinded to the test device independently measured the gutter areas and the patent chimney graft lumen at the level of the Endurant's suprarenal stent, at the level of the chimney's maximum curvature, and 10 mm inside the renal artery. The intraclass correlation coefficients (ICC) were calculated to assess interreader reliability. Results: The mean gutter areas were 19.3±7, 20.2±8, and 22.3±8 mm2 for the Advanta, VBX, and BeGraft+, respectively (all p>0.05). At the level of the aortic endograft's suprarenal stent struts, the mean diameter of the Advanta V12, VBX, and BeGraft+ were 4.46±0.3, 4.12±0.4, and 4.12±0.3 mm, respectively (all p>0.05). At the level of the maximum chimney graft angulation, the mean diameters were 3.77±0.3, 4.16±0.1, and 3.74±0.3 mm, respectively (all p>0.05). In the right renal artery, the mean diameters were 3.91±0.2, 4.05±0.9, and 4.3±0.4 mm, respectively (all p>0.05). The ICCs varied between 0.7 and 0.9, indicating good agreement between readers. Conclusion: These in vitro findings showed comparable results between the Advanta V12 and the available BECS used in conjunction with the Endurant endograft according to the instructions for use. Further clinical evaluation is needed to confirm these results.

Applied anatomy of screw placement via the posterior arch of the atlas and anatomy-based refinements of the technique.

PURPOSE: To present a method of posterior arch and lateral mass screw (PALMS) insertion and to prove its feasibility. METHODS: Four formalin-fixed specimens and 40 macerated atlas vertebras were used to describe the relevant anatomy. The height of the posterior arch was measured on 42 consecutive patients using standard CT of the cervical spine. The operative technique and the special CT reconstructions used for preoperative planning are described. Eight patients underwent posterior fixation using this technique. RESULTS: We described the relevant anatomy and important anatomical landmarks of the posterior arch of the atlas. PALMS placement was modified according to these anatomical findings. Fifteen PALMSs were placed in eight patients using this technique without vascular or neural injury. CONCLUSION: It is feasible to place PALMS using the described technique. CT angiography is of crucial importance for preoperative planning using the described special reconstructions. The arch posterior to the lateral mass (APLM) is defined as the bone stock situated posterior to the lateral mass, respecting its convergence. The ideal entry point for a PALMS is on the APLM above the center of the converging lateral mass. A complete or incomplete ponticulus posticus and a retrotransverse foramen or groove can be used as an accessory landmark to refine the entry point.

Coronary stent imaging with dual-source CT: assessment of lumen visibility using different convolution kernels and postprocessing filters.

BACKGROUND: Assesment of the coronary arteries after stent placement using coronary computed tomography angiography (CCTA) currently requires reconstruction of images with soft kernels for the assessment of atherosclerotic plaques and dedicated edge enhancing kernels for the evaluation of the stent lumen. PURPOSE: To evaluate a two-dimensional filter tool that provides instant postprocessing of images reconstructed with soft kernels into edge-enhanced images and vice versa and thus may eliminate the need for two separate reconstrcutions for the assessment of coronary artery stents using CCTA. MATERIAL AND METHODS: Twenty stents with a diameter of 3.0 mm placed in a vascular phantom were scanned with a dual-source CT using standard parameters. Images were reconstructed with a soft B30f and an edge-enhancing B46f kernel and postprocessed with the corresponding filter algorithm (F30 for B30f images; F46 for B46f images). The resulting four data-sets were evaluated for lumen visibility, intraluminal attenuation, and image noise by two independent readers. Results were validated in vivo against invasive coronary angiography in data-sets from patients with coronary artery stents. RESULTS: Average intraluminal attenuation was 552.6 HU, 527.3 HU, 207.9 HU, and 267.5 HU for B30f, F30, B46f, and F46 images, respectively (P < 0.0001). Average image noise was 11.3, 10.6, 19.2, and 15.0 HU, respectively (P < 0.0001). The visible stent diameter was significantly higher in the B46f (59.6%) and F46 images (54%) compared to the B30f (48.3%) and F30 (51.5%) images (P < 0.0001). In the patient study, lumen assessability was significantly better in B46f images than in F46 images. Sensitivity for stenosis detection was best in the original B46f images with a sensitivity of 67% and a specificity of 94%. CONCLUSION: The postprocessing filter reduces image noise, however currently it does not offer an alternative to image reconstruction using the edge-enhancing kernels for the evaluation of the stent lumen.

Correlation of concentrations of high-sensitivity troponin T and high-sensitivity C-reactive protein with plaque progression as measured by CT coronary angiography.

BACKGROUND: Elevated levels of inflammatory biomarkers are associated with increased cardiovascular morbidity and mortality. OBJECTIVE: We sought to determine whether elevated concentrations of high-sensitivity troponin T (hs-TnT) and high-sensitivity C-reactive protein (hs-CRP) predict progression of coronary artery disease (CAD) as determined by coronary CT angiography (coronary CTA). METHODS: Patients presenting to the emergency department with acute chest pain who initially showed no evidence of an acute coronary syndrome underwent baseline and follow-up coronary CTA (median follow-up, 23.9 months) using identical acquisition and reconstruction parameters. Coronary CTA data of each major coronary artery were co-registered. Cross-sections were assessed for the presence of calcified and noncalcified plaques. Progression of atherosclerotic plaque and change of plaque composition from noncalcified to calcified plaque was evaluated and correlated to levels of hs-TnT and hs-CRP at the time of the baseline CT. RESULTS: Fifty-four patients (mean age, 54.1 years; 59% male) were included, and 6775 cross-sections were compared. CAD was detected in 12.2 ± 21.2 cross-sections per patient at baseline. Prevalence of calcified plaque increased by 1.5 ± 2.4 slices per patient (P < .0001) over the follow-up period. On average, 1.6 ± 3.6 slices with new noncalcified plaque were found per patient (P < .0001) and 0.7 ± 1.7 slices with pre-existing noncalcified plaque had progressed to calcified plaque (P < .0001). After multivariate adjustment, change of overall CAD burden was predicted by baseline hs-TnT and hs-CRP (r = 0.29; P = .039 and r = 0.40; P = .004). Change of plaque composition was associated with baseline hs-TnT (r = 0.29; P = .03). CONCLUSION: Concentrations of hs-TnT and hs-CRP are weakly associated with a significant increase in CAD burden and change in plaque composition over 24 months independent of baseline risk factors.

Coronary artery stent imaging with CT using an integrated electronics detector and iterative reconstructions: first in vitro experience.

BACKGROUND: Despite continuous improvements in CT technology, accurate stent lumen delineation remains challenging. PURPOSE: The aim was to evaluate the quality of coronary stent lumen delineation with CT using a detector with integrated electronics. METHODS: Twelve coronary stents placed in plastic tubes and filled with contrast agent (CT number 250 HU) were imaged with either a 128-section dual-source CT machine equipped with conventional detector or with integrated electronics. On both scanners, images were reconstructed with filtered back projection (slice thickness 0.6 mm; increment 0.4 mm) and sinogram-affirmed iterative reconstruction (slice thickness 0.6 mm; increment 0.4 mm), and with iterative reconstruction (slice thickness 0.5 mm; increment 0.3 mm) on the integrated scanner. Two blinded, independent readers assessed image quality, noise, in-stent diameter, in-stent attenuation, and image sharpness by using signal intensity profiles across stents. RESULTS: Interreader agreement for image quality assessment was substantial (κ = 0.798). Both readers rated best image quality in data sets from integrated detector at highest spatial resolution (86 or 72% of stents rated best quality). Image noise was significantly lower in data sets scanned with integrated detector, being lowest at 0.6 mm slice thickness (14.3 vs 21.0 HU; P < .001). Differences between measured and true in-stent diameters and differences in attenuation across stents were smallest, and average/maximum image sharpness was highest in data sets from the integrated detector using iterative reconstructions. CONCLUSION: CT coronary stent imaging is significantly improved by using a detector with integrated electronics combined with iterative reconstructions.

Weekly dose reports: the effects of a continuous quality improvement initiative on coronary computed tomography angiography radiation doses at a tertiary medical center.

RATIONALE AND OBJECTIVES: Numerous protocols have been developed to reduce cardiac computed tomography angiography (cCTA) radiation dose while maintaining image quality. However, cCTA practice is highly dependent on physician and technologist experience and education. In this study, we sought to evaluate the incremental value of real-time feedback via weekly dose reports on a busy cCTA service. MATERIALS AND METHODS: This time series analysis consisted of 450 consecutive patients whom underwent physician-supervised cCTA for clinically indicated native coronary evaluation between April 2011 and January 2013, with 150 patients before the initiation of weekly dose report (preintervention period: April-September 2011) and 150 patients after the initiation (postintervention period: September 2011-February 2012). To assess whether overall dose reductions were maintained over time, results were compared to a late control group consisting of 150 consecutive cCTA exams, which were performed after the study (September 2012-January 2013). Patient characteristics and effective radiation were recorded and compared. RESULTS: Total radiation dose was significantly lower in the postintervention period (3.4 mSv [1.7-5.7] and in the late control group (3.3 mSv [2.0-5.3] versus the preintervention period (4.1 mSv [2.1-6.6] (P = .005). The proportion of high-dose outliers was also decreased in the postintervention period and late control period (exams <10 mSv were 88.0% preintervention vs. 97.3% postintervention vs. 95.3% late control; exams <15 mSv were 98.0% preintervention vs. 100.0% postintervention vs. 98.7% late control; exams <20.0 mSv were 98.7% preintervention vs. 100.0% postintervention vs. 100.0% late control). CONCLUSION: Weekly dose report feedback of site radiation doses to patients undergoing physician-supervised cCTA resulted in significant overall dose reduction and reduction of high-dose outliers. Overall dose reductions were maintained beyond the initial study period.

Histogram analysis of lipid-core plaques in coronary computed tomographic angiography: ex vivo validation against histology.

PURPOSE: In coronary computed tomographic angiography (CTA), low attenuation of coronary atherosclerotic plaque is associated with lipid-rich plaques. However, an overlap in Hounsfield units (HU) between fibrous and lipid-rich plaque as well as an influence of luminal enhancement on plaque attenuation was observed and may limit accurate detection of lipid-rich plaques by CTA. We sought to determine whether the quantitative histogram analysis improves accuracy of the detection of lipid-core plaque (LCP) in ex vivo hearts by validation against histological analysis. MATERIALS AND METHODS: Human donor hearts were imaged with a 64-slice computed tomographic scanner using a standard coronary CTA protocol, optical coherence tomography (OCT), a histological analysis. Lipid-core plaque was defined in the histological analysis as any fibroatheroma with a lipid/necrotic core diameter of greater than 200 µm and a circumference greater than 60 degrees as well as a cap thickness of less than 450 µm. In OCT, lipid-rich plaque was determined as a signal-poor region with diffuse borders in 2 quadrants or more. In CTA, the boundaries of the noncalcified plaque were manually traced. The absolute and relative areas of low attenuation plaque based on pixels with less than 30, less than 60, and less than 90 HU were calculated using quantitative histogram analysis. RESULTS: From 5 hearts, a total of 446 cross sections were coregistered between CTA and the histological analysis. Overall, 55 LCPs (12%) were identified by the histological analysis. In CTA, the absolute and relative areas of low attenuation plaque less than 30, less than 60, and less than 90 HU were 0.14 (0.31) mm2 (4.22% [9.02%]), 0.69 (0.95) mm2 (18.28% [21.22%]), and 1.35 (1.54) mm2 (35.65% [32.07%]), respectively. The low attenuation plaque area correlated significantly with histological lipid content (lipid/necrotic core size [in square millimeter] and a portion of lipid/necrotic core on the entire plaque) at all thresholds but was the strongest at less than 60 HU (r = 0.53 and r = 0.48 for the absolute and relative areas, respectively). Using a threshold of 1.0 mm2 or greater, the absolute plaque area of less than 60 HU in CTA yielded 69% sensitivity and 80% specificity to detect LCP, whereas sensitivity and specificity were 73% and 71% for using 25.0% or higher relative area less than 60 HU. The discriminatory ability of CTA for LCP was similar between the absolute and relative areas (the area under the curve, 0.744 versus 0.722; P = 0.37). Notably, the association of the low attenuation plaque area in CTA with LCP was not altered by the luminal enhancement for the relative (P = 0.48) but for the absolute measurement (P = 0.03). Similar results were achieved when validated against lipid-rich plaque by OCT in a subset of 285 cross sections. CONCLUSIONS: In ex vivo conditions, the relative area of coronary atherosclerotic plaque less than 60 HU in CTA as derived from quantitative histogram analysis has good accuracy to detect LCP as compared with a histological analysis independent of differences in luminal contrast enhancement.

Classification of coronary atherosclerotic plaques ex vivo with T1, T2, and ultrashort echo time CMR.

OBJECTIVES: This study sought to determine whether the classification of human coronary atherosclerotic plaques with T1, T2, and ultrashort echo time (UTE) cardiac magnetic resonance (CMR) would correlate well with atherosclerotic plaque classification by histology. BACKGROUND: CMR has been extensively used to classify carotid plaque, but its ability to characterize coronary plaque remains unknown. In addition, the detection of plaque calcification by CMR remains challenging. Here, we used T1, T2, and UTE CMR to evaluate atherosclerotic plaques in fixed post-mortem human coronary arteries. We hypothesized that the combination of T1, T2, and UTE CMR would allow both calcified and lipid-rich coronary plaques to be accurately detected. METHODS: Twenty-eight plaques from human donor hearts with proven coronary artery disease were imaged at 9.4-T with a T1-weighted 3-dimensional fast low-angle shot (FLASH) sequence (250-µm resolution), a T2-weighted rapid acquisition with refocused echoes (RARE) sequence (in-plane resolution 0.156 mm), and an UTE sequence (300-µm resolution). Plaques showing selective hypointensity on T2-weighted CMR were classified as lipid-rich. Areas of hypointensity on the T1-weighted images, but not the UTE images, were classified as calcified. Hyperintensity on the T1-weighted and UTE images was classified as hemorrhage. Following CMR, histological characterization of the plaques was performed with a pentachrome stain and established American Heart Association criteria. RESULTS: CMR showed high sensitivity and specificity for the detection of calcification (100% and 90%, respectively) and lipid-rich necrotic cores (90% and 75%, respectively). Only 2 lipid-rich foci were missed by CMR, both of which were extremely small. Overall, CMR-based classification of plaque was in complete agreement with the histological classification in 22 of 28 cases (weighted κ = 0.6945, p < 0.0001). CONCLUSIONS: The utilization of UTE CMR allows plaque calcification in the coronary arteries to be robustly detected. High-resolution CMR with T1, T2, and UTE contrast enables accurate classification of human coronary atherosclerotic plaque.

The napkin-ring sign indicates advanced atherosclerotic lesions in coronary CT angiography.

OBJECTIVES: This study sought to determine the accuracy of plaque pattern assessment by coronary computed tomography angiography (CCTA) to differentiate between early and advanced atherosclerotic lesions as defined by histology. BACKGROUND: A ringlike attenuation pattern of coronary atherosclerotic plaques termed as napkin-ring sign (NRS) was described in CCTA of patients who had acute coronary syndrome. METHODS: All procedures were performed in accordance with local and federal regulations and the Declaration of Helsinki. Approval of the local ethics committees was obtained. We investigated 21 coronary arteries of 7 donor hearts. Overall, 611 histological sections were obtained and coregistered with CCTA images. The CCTA cross sections were read in random order for conventional plaque categories (noncalcified [NCP], mixed [MP], calcified [CP]) and plaque patterns (homogenous, heterogeneous with no napkin-ring sign [non-NRS], and heterogeneous with NRS). RESULTS: No plaque was detected in 134 (21.9%), NCP in 254 (41.6%), MP in 191 (31.3%), and CP in 32 (5.2%) CCTA cross sections. The NCP and MP were further classified into homogenous plaques (n = 207, 46.5%), non-NRS plaques (n = 200, 44.9%), and NRS plaques (n = 38, 8.6%). The specificities of NCP and MP to identify advanced lesions were moderate (57.9%, 95% confidence interval [CI]: 50.1% to 65.6%, and 72.1%, 95% CI: 64.7% to 79.4%, respectively), which were similar to the homogenous and heterogeneous plaques (62.6%, 95% CI: 54.8% to 70.3%, and 67.3%, 95% CI: 58.6% to 76.1%, respectively). In contrast, the specificity of the NRS to identify advanced lesions was excellent (98.9%, 95% CI: 97.6% to 100%). The diagnostic performance of the pattern-based scheme to identify advanced lesions was significantly better than that of the conventional plaque scheme (area under the curve: 0.761 vs. 0.678, respectively; p = 0.001). CONCLUSIONS: The assessment of the plaque pattern improves diagnostic accuracy of CCTA to identify advanced atherosclerotic lesions. The CCTA finding of NRS has a high specificity and high positive predictive value for the presence of advanced lesions.

Differentiation of early from advanced coronary atherosclerotic lesions: systematic comparison of CT, intravascular US, and optical frequency domain imaging with histopathologic examination in ex vivo human hearts.

PURPOSE: To establish an ex vivo experimental setup for imaging coronary atherosclerosis with coronary computed tomographic (CT) angiography, intravascular ultrasonography (US), and optical frequency domain imaging (OFDI) and to investigate their ability to help differentiate early from advanced coronary plaques. MATERIALS AND METHODS: All procedures were performed in accordance with local and federal regulations and the Declaration of Helsinki. Approval of the local Ethics Committee was obtained. Overall, 379 histologic cuts from nine coronary arteries from three donor hearts were acquired, coregistered among modalities, and assessed for the presence and composition of atherosclerotic plaque. To assess the discriminatory capacity of the different modalities in the detection of advanced lesions, c statistic analysis was used. Interobserver agreement was assessed with the Cohen κ statistic. RESULTS: Cross sections without plaque at coronary CT angiography and with fibrous plaque at OFDI almost never showed advanced lesions at histopathologic examination (odds ratio [OR]: 0.02 and 0.06, respectively; both P<.0001), while mixed plaque at coronary CT angiography, calcified plaque at intravascular US, and lipid-rich plaque at OFDI were associated with advanced lesions (OR: 2.49, P=.0003; OR: 2.60, P=.002; and OR: 31.2, P<.0001, respectively). OFDI had higher accuracy for discriminating early from advanced lesions than intravascular US and coronary CT angiography (area under the receiver operating characteristic curve: 0.858 [95% confidence interval {CI}: 0.802, 0.913], 0.631 [95% CI: 0.554, 0.709], and 0.679 [95% CI: 0.618, 0.740]; respectively, P<.0001). Interobserver agreement was excellent for OFDI and coronary CT angiography (κ=0.87 and 0.85, respectively) and was good for intravascular US (κ=0.66). CONCLUSION: Systematic and standardized comparison between invasive and noninvasive modalities for coronary plaque characterization in ex vivo specimens demonstrated that coronary CT angiography and intravascular US are reasonably associated with plaque composition and lesion grading according to histopathologic findings, while OFDI was strongly associated. These data may help to develop initial concepts of sequential imaging strategies to identify patients with advanced coronary plaques.

Histopathological correlates of the napkin-ring sign plaque in coronary CT angiography.

OBJECTIVE: The purpose of this study was to identify histologic characteristics of advanced coronary atherosclerotic plaques that are related with the detection of the napkin-ring sign (NRS) in coronary CT angiography (CCTA). METHODS: CCTA was performed in 7 human donor hearts. Histological slicing and stainings were performed in 1 mm increments of each major coronary artery. Histology was co-registered with the CT-data and classified according to the modified AHA classification. RESULTS: Advanced plaques (types IV-VI) were present in 139 (23%) of 611 cross sections. Of these 33 (24%) demonstrated an NRS in CCTA. NRS plaques were associated with greater non-core plaque area (median 10.2 vs. 6.4 mm(2), p < 0.01) and larger vessel area (median 17.1 vs. 13.0 mm(2), p < 0.01). The area of the necrotic/lipid core was larger in plaques with NRS (median 1.1 vs. 0.5 mm(2), p = 0.05). Angiogenesis tended to be more frequent in plaques with NRS (48% vs. 30%) whereas micro-calcifications tended to be more frequent in plaques without NRS (27% vs. 46%) (p = 0.06 and 0.07 respectively). In a multivariate analysis, necrotic/lipid core area (OR = 1.9), non-core plaque area (OR = 1.6), and total vessel area (OR = 0.9) independently predicted the appearance of the NRS in coronary CT angiography. CONCLUSION: Delineation of NRS in CCTA is independently linked to the size of the necrotic/lipid core, the size of the non-core plaque and to the vessel area as measured in histology of advanced coronary atherosclerotic plaques.

Differentiation of malignant and benign cardiac tumors using 18F-FDG PET/CT.

UNLABELLED: In the diagnostic algorithm of cardiac tumors, the noninvasive determination of malignancy and metastatic spread is of major interest to stratify patients and to select and monitor therapies. In the diagnostic work-up, morphologic imaging modalities such as echocardiography or magnetic resonance tomography offer information on, for example, size, invasiveness, and vascularization. However, preoperative assessment of malignancy may be unsatisfactory. The aim of this study was to evaluate the diagnostic value of (18)F-FDG PET and the incremental diagnostic value of an optimized CT score in this clinical scenario. METHODS: (18)F-FDG PET/CT scans (whole-body imaging with low-dose CT) of 24 consecutive patients with newly diagnosed cardiac tumors were analyzed (11 men, 13 women; mean age ± SD, 59 ± 13 y). The maximum standardized uptake values (SUV(max)) of the tumors were measured. Patients were divided into 2 groups: benign cardiac tumors (n = 7) and malignant cardiac tumors (n = 17) (cardiac primaries [n = 8] and metastases [n = 9]). SUV(max) was compared between the 2 groups. Results were compared with contrast-enhanced CT, using standardized criteria of malignancy. Histology served as ground truth. RESULTS: Mean SUV(max) was 2.8 ± 0.6 in benign cardiac tumors and significantly higher both in malignant primary and in secondary cardiac tumors (8.0 ± 2.1 and 10.8 ± 4.9, P < 0.01). Malignancy was determined with a sensitivity of 100% and specificity of 86% (accuracy, 96%), after a cutoff with high sensitivity (SUV(max) of 3.5) was chosen to avoid false-negatives. Morphologic imaging reached a sensitivity of 82% and a specificity of 86% (accuracy, 83%). Both false-positive and false-negative decisions in morphology could be corrected in all but 1 case using a metabolic threshold with an SUV(max) of 3.5. In addition, extracardiac tumor manifestations were detected in 4 patients by whole-body (18)F-FDG PET/CT. CONCLUSION: (18)F-FDG PET/CT can aid the noninvasive preoperative determination of malignancy and may be helpful in detecting metastases of malignant cardiac tumors.

Cardiac CT in the emergency department.

Current triage strategies are not effective in correctly identifying patients suffering from acute coronary syndrome (ACS). The diagnostic workup of patients presenting with acute chest pain continues to represent a major challenge for emergency department (ED) personnel. This statement holds especially true for patients with a low to intermediate likelihood for ACS. Taking current concepts for the diagnosis and management of patients presenting with acute chest pain to the ED into account, this article discusses the evidence and potential role of coronary computed tomography angiography to improve management of patients with possible ACS.

Dual-Source CT Angiography of Peripheral Arterial Stents: In Vitro Evaluation of 22 Different Stent Types.

Purpose. To test different peripheral arterial stents using four image reconstruction approaches with respect to lumen visualization, lumen attenuation and image noise in dual-source multidetector row CT (DSCT) in vitro. Methods and Materials. 22 stents (nitinol, steel, cobalt-alloy, tantalum, platinum alloy) were examined in a vessel phantom. All stents were imaged in axial orientation with standard parameters. Image reconstructions were obtained with four different convolution kernels. To evaluate visualization characteristics of the stent, the lumen diameter, intraluminal density and noise were measured. Results. The mean percentage of the visible stent lumen diameter from the nominal stent diameter was 74.5% ± 5.7 for the medium-sharp kernel, 72.8% ± 6.4 for the medium, 70.8% ± 6.4 for the medium-smooth and 67.6% ± 6.6 for the smooth kernel. Mean values of lumen attenuation were 299.7HU ± 127 (medium-sharp), 273.9HU ± 68 (medium), 270.7HU ± 53 (medium-smooth) and 265.8HU ± 43. Mean image noise was: 54.6 ± 6.3, 20.5 ± 1.7, 16.3 ± 1.7, 14.0 ± 2 respectively. Conclusion. Visible stent lumen diameter varies depending on stent type and scan parameters. Lumen diameter visibility increases with the sharpness of the reconstruction kernel. Smoother kernels provide more realistic density measurements inside the stent lumen and less image noise.

MR Angiography of Peripheral Arterial Stents: In Vitro Evaluation of 22 Different Stent Types.

Purpose. To evaluate stent lumen visibility of a large sample of different peripheral arterial (iliac, renal, carotid) stents using magnetic resonance angiography in vitro. Materials and Methods. 21 different stents and one stentgraft (10 nitinol, 7 316L, 2 tantalum, 1 cobalt superalloy, 1 PET + cobalt superalloy, and 1 platinum alloy) were examined in a vessel phantom (vessel diameters ranging from 5 to 13 mm) filled with a solution of Gd-DTPA. Stents were imaged at 1.5 Tesla using a T1-weighted 3D spoiled gradient-echo sequence. Image analysis was performed measuring three categories: Signal intensity in the stent lumen, lumen visibility of the stented lumen, and homogeneity of the stented lumen. The results were classified using a 3-point scale (good, intermediate, and poor results). Results. 7 stents showed good MR lumen visibility (4x nitinol, 2x tantalum, and 1x cobalt superalloy). 9 stents showed intermediate results (5x nitinol, 2x 316L, 1x PET + cobalt superalloy, and 1x platinum alloy) and 6 stents showed poor results (1x nitinol, and 5x 316L). Conclusion. Stent lumen visibility varies depending on the stent material and type. Some products show good lumen visibility which may allow the detection of stenoses inside the lumen, while other products cause artifacts which prevent reliable evaluation of the stent lumen with this technique.

Expression of NPP1 is regulated during atheromatous plaque calcification.

Mutations of the ENPP1 gene encoding ecto-nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) are associated with medial calcification in infancy. While the inhibitory role of matrix proteins such as osteopontin (OPN) with respect to atherosclerotic plaque calcification has been established, the role of NPP1 in plaque calcification is not known. We assessed the degree of plaque calcification (computed tomography), NPP1 and OPN localization (immunohistochemistry) and expression (RT-PCR) in a cohort of 45 patients undergoing carotid endatherectomy for significant stenosis of the internal carotid artery and in normal arteries (N= 50). We correlated NPP1 and OPN expression levels to the degree of plaque calcification, to pro-atherogenic factors and statin therapy. NPP1 was demonstrated in the base and in the shoulder of atherosclerotic plaques. Compared to normal arteries and non-calcified plaques, in calcified plaques NPP1 mRNA was decreased (P < 0.0001). OPN mRNA levels were up-regulated in carotid atheroma. NPP1 and OPN expression levels positively correlated with the degree of plaque calcification (R= 0.54, P= 0.00019 and R= 0.46, P= 0.017, respectively) and with risk factors of atherosclerosis. Expression of the calcification inhibitor NPP1 is down-regulated in calcified atherosclerotic plaques. Our correlation data point to a counter-active mechanism, which in the end turns out to be insufficient to prevent further progression of calcification.

T1-weighted MRI for the detection of coronary artery plaque haemorrhage.

OBJECTIVE: Hyperintense areas in atherosclerotic plaques on pre-contrast T1-weighted MRI have been shown to correlate with intraplaque haemorrhage. We evaluated the presence of T1 hyperintensity in coronary artery plaques in coronary artery disease (CAD) patients and correlated results with multi-detector computed tomography (MDCT) findings. METHODS: Fifteen patients with CAD were included. Plaques detected by MDCT were categorised based on their Hounsfield number. T1-weighted inversion recovery (IR) MRI prepared coronary MRI for the detection of plaque and steady-state free-precession coronary MR-angiography for anatomical correlation was performed. After registration of MDCT and MRI, regions of interest were defined on MDCT-visible plaques and in corresponding vessel segments acquired with MRI. MDCT density and MR signal measurement were performed in each plaque. RESULTS: Forty-three plaques were identified with MDCT. With IR-MRI 5/43 (12%) plaques were hyperintense, 2 of which were non-calcified and 3 mixed. Average signal-to-noise and contrast-to-noise ratios of hyperintense plaques were 15.7 and 9.1, compared with 5.6 and 1.2 for hypointense plaques. Hyperintense plaques exhibited a significantly lower CT density than hypointense plaques (63.6 vs. 140.8). There was no correlation of plaque signal intensity with degree of stenosis. CONCLUSION: T1-weighted IR-MRI may be useful for non-invasive detection and characterisation of intraplaque haemorrhage in coronary artery plaques.

High-pitch 128-slice dual-source CT for the assessment of coronary stents in a phantom model.

RATIONALE AND OBJECTIVES: To evaluate the quality of stent lumen delineation using dual-source computed tomography (DSCT) in the standard-pitch mode (SP) as compared to the high-pitch mode (HP) in a phantom study. MATERIALS AND METHODS: Forty different coronary stents placed in plastic tubes filled with contrast agent were imaged with a second generation DSCT system in a SP (pitch 0.23) and HP (pitch 3.4) mode in orientations of 0°, 45°, and 90° relative to the z-axis. Two observers independently measured the in-stent lumen and the attenuation values in the center of the stents. The artificial lumen narrowing (ALN) was calculated using the measured in-stent lumen and the nominal diameter of the plastic tube. RESULTS: Interobserver correlation was excellent for in-stent lumen (0.86) and attenuation measurements (0.91). There was no significant difference neither for ALN (SP: 54.7-62.8%; HP: 55.8-64.0%) nor attenuation (SP: 356-395 Hounsfield units [HU]; HP: 352-384 HU) between SP and HP mode. For both modes, the orientation of the stent relative to the z-axis significantly affected ALN and attenuation (each P < .001). CT volume dose index was significantly lower using HP mode as compared to SP mode (P < .001). CONCLUSION: The HP mode in DSCT provides visualization of the coronary in-stent lumen comparable to that measured in SP mode while reducing applied radiation dose in a stationary phantom model.

Prediction of lymph node manifestations in malignant lymphoma: significant role of volumetric compared with established metric lymph node analysis in multislice computed tomography.

OBJECTIVE: Comparison of 2-dimensional and semiautomated 3-dimensional (3D) measurements to distinguish between benign and malignant lymph nodes in patients with malignant lymphoma. METHODS: Whole-body positron emission tomography-computed tomography (PET-CT) was performed in 33 patients before therapy for malignant lymphoma. Two hundred fifty-seven peripheral lymph nodes (mean size, 13.4 +/- 5.4 mm) were evaluated independently by 2 radiologists, both manually and with the use of semiautomated segmentation software. Long-axis diameter (LAD), short-axis diameter (SAD), maximal 3D diameter, volume, and elongation were measured. Positron emission tomography-CT and PET-CT follow-up and/or histology served as the reference standard. Statistical analysis encompassed intraclass correlation coefficients and receiver operating characteristic curves. RESULTS: The standard of reference revealed involvement in 116 (45%) of 257 lymph nodes. Manual and semiautomated LAD and SAD showed good correlation with intraclass coefficients of 0.85 and 0.72, respectively. Semiautomated prediction of malignant lymph nodes revealed the highest areas under the receiver operating characteristic curves for volume (0.760; 95% confidence interval [CI], 0.639-0.887) followed by SAD (0.740; 95% CI, 0.616-0.862). The findings for LAD (0.722; 95% CI, 0.588-0.855), maximal 3D diameter (0.697; 95% CI, 0.565-0.830), and lymph node elongation (0.605; 95% CI, 0.466-0.745) were significantly lower (P < 0.05). CONCLUSIONS: Volumetric lymph node analysis is significantly superior compared with established LAD in the prediction of lymph node involvement and therefore can add to the definition of peripheral lymphoma target lesions.